How to Change the Temperature Display (°F or °C) on Elan Control Boards
In the world of food service, precise temperature control is essential for maintaining food quality and safety. At FWEParts, we understand the need for flexibility and accuracy in your equipment settings. This guide, “How to Change the Temperature Display (°F or °C) on Elan Control Boards,” provides simple, step-by-step instructions to help you switch between Fahrenheit and Celsius displays on your control boards. These Elan Control Boards are featured on Radiant Heat and Top Mount Systems, covering various series including A, BT, HHC, HLC, PST, PTST, TST, and UHST. Our goal is to make this process straightforward so you can adjust your settings to meet your specific needs. For additional support or any questions, our dedicated team is always available. Contact us at 1-615-805-3270 or service@fweparts.com for expert assistance.
Parts Covered in this Tutorial
Tools Needed
- None!
Steps
0:00 | Introduction
0:07 | Step 1: Turn the knob to the OFF (0°) position and turn the power switch off (O)
0:14 | Step 2: While pressing the “TEMP RECALL” button, turn the power switch to the on position (I). Press and hold until the desired temperature setting is displayed.
As we conclude this guide on changing the temperature display on Elan Control Boards, we hope you found the instructions straightforward and helpful. At FWEParts, our goal is to ensure your equipment operates according to your specific needs, contributing to the success of your food service operations. If you need further assistance or have any questions, our expert team is here to help. Don’t hesitate to reach out to us at 1-615-805-3270 or service@fweparts.com for personalized support. We’re dedicated to your success and are always just a call or an email away.
