How to Perform Door and Latch Adjustments on FWE Units

A Series, A-XL Series, BT Series, E Series, E-XL Series, E-XXL Series, HHC Series, HHS Series, HLC Series, LCH Series, LCH-G2 Series, LCH-LV-G2 Series, LCH-SK-G2 Series, LCHR Series, MTU Series, PHTT Series, PHU Series, PST Series, PTST Series, RH Series, RH-B Series, RH-RB Series, Series, TST Series, TST-SL Series, TST-TB Series, UHST Series, Uncategorized

A Step-by-Step Guide to Fine-Tuning Your FWE Units for Peak Performance

Maintaining the proper function of your equipment is essential for the smooth operation of your food service business. At FWEParts, we understand the importance of ensuring your units are in top condition. This guide, “How to Perform Door and Latch Adjustments on FWE Units,” provides step-by-step instructions to help you keep your doors and latches operating perfectly. With clear and concise steps, you’ll be able to address issues such as improper door closure and latch malfunction, ensuring your equipment performs reliably. For any additional assistance or inquiries, our dedicated support team is always available. Contact us at 1-615-805-3270 or service@fweparts.com for expert guidance.

Tools Needed

Driver Drill with #2 Phillips Bit
Flat Blade Screwdriver
Level

Steps

Door Adjustment (If the door is not closing properly)

0:21 | Step 1: Locate and remove hinge covers from the door hinges.

0:33 | Step 2: Loosen all screws that mount the hinges to both the door and the unit.

0:43 | Step 3: Carefully adjust the door in and out, and side to side taking note of the door leveling and any gaps.

0:51 | Step 4: With the door in a level position, retighten the screws loosened in Step 2.

0:59 | Step 5: Test the door for proper sealing and closure. Re[peat steps 2 – 4 as needed.

1:05 | Step 6: Once the door seals properly and is level, reinstall the hinge covers and return the unit to service.

Latch Adjustment (if the door is not latching properly)

1:16 | Step 1: Locate the door latch and screw for the J-Hook on the bottom side of the latch. Loosen the screw.

1:27 | Step 2: Carefully adjust the J-Hook in and out, tightening the screw and then testing the closure of the unit.

1:33 | Step 3: Repeat Steps 1 & 2 as needed.

1:40 | Step 4 Once the floor handle properly locks onto the latch, confirm the J-Hook is sufficiently high and in place. Test the door for proper sealing and return the unit to service.

As we conclude this guide on performing door and latch adjustments on FWE units, we hope the instructions have been clear and helpful. At FWEParts, our priority is to ensure your equipment operates flawlessly, supporting the efficiency and success of your food service business. If you require further guidance on these adjustments or have any other questions, our expert team is always here to assist you. Feel free to contact us at 1-615-805-3270 or service@fweparts.com for personalized support. We’re dedicated to your success and are just a call or an email away.