How to Replace Casters used on FWE Units

A Series, A-XL Series, E Series, E-XL Series, E-XXL Series, HHS Series, LCH Series, LCH-G2 Series, LCH-SK-G2 Series, MTU Series, PHTT Series, PHU Series, RH Series, Series, TST-SL Series, Uncategorized

A step-by-step guide to easily replace the casters on your FWE unit

In the bustling world of the food service industry, the mobility and stability of your equipment is essential for efficient operation and service excellence. At FWEParts, we are dedicated to ensuring that every aspect of your FWE equipment functions optimally. This includes providing detailed, user-friendly guides for essential maintenance tasks. Our latest tutorial focuses on how to replace casters on FWE units, a key step in maintaining the maneuverability and safety of your equipment. With this guide, you’ll be equipped with the knowledge to perform this task swiftly and effectively. For any questions or further assistance, our expert team is always on standby. Feel free to contact us at 1-615-805-3270 or email us at service@fweparts.com for any help you may need.

Ordering Replacement Casters

If you are in need of new casters for your FWE unit, you can easily find and purchase them by visiting this link. Our selection ensures you get the right match for your equipment, guaranteeing quality and compatibility.

Tools Needed

Socket Wrench with 1/2″ Socket
Socket Extender

Steps

0:00 | Introduction

Replacing Casters (Non Refrigeration)

0:24 | Step 1: Remove all racks, tray slides, and/or shelving inside the unit. Place the unit onto its back, using a buffer such as cardboard or styrofoam to prevent scratches to the outside of the unit.

0:35 | Step 2: Using a socket wrench, remove the four nuts and washers mounting the caster to the unit. Remove and discard the caster.

0:51 | Step 3: Install new caster, making sure studs line up with the caster plate. Use nuts and washers removed in Step 2 to mount in place.

1:16 | Step 4: Place the unit upright and test for functionality.

1:25 | Step 5: Reinstall all racks, tray slides, and/or shelving inside the unit. Return to service.

Replacing Casters (Refrigeration)

1:30 | Step 1: Remove all racks, tray slides, and/or shelving inside the unit. Using a lift, raise the unit in the air for clearance tall enough for tools underneath the unit.

2:01 | Step 2: Using a socket wrench, remove the four nuts and washers mounting the caster to the unit. Remove and discard the caster.

2:17 | Step 3: Install new caster, making sure studs line up with the caster plate. Use nuts and washers removed in Step 2 to mount in place.

2:37 | Step 4: Set the unit back down and remove off the lift. Test for operationality.

2:45 | Step 5: Reinstall all racks, tray slides, and/or shelving inside the unit. Return to service.

As we wrap up this guide on replacing casters for FWE units, we trust that you have found the instructions clear and helpful. Our commitment at FWEParts is to provide you with the resources and support you need to keep your equipment running smoothly and efficiently. Remember, our team is here to assist you with any additional questions or guidance you may require in maintaining your FWE equipment. Please don’t hesitate to reach out to us at 1-615-805-3270 or via email at service@fweparts.com for personalized support. Your success in the food service industry is our priority, and we are always ready to help ensure your equipment performs at its best.